["Description:\r\nbrand new and high quality\r\n\r\nFeatures:\r\nThis compact ruler allows you to determine if your lens is auto-focusing accurately as it should. It is an essential tool that is particularly useful when shooting with a shallow depth of field, where focusing should ideally be \"spot on\".\r\nYou can use this ruler to determine how \"off\" the focusing is for a particular camera / lens combination and, on supported cameras, adjust the camera's auto-focus settings to resolve this\r\nOn for cameras, this feature is known as \"for AF Fine Tune\". On for and for cameras, it's known as \"for AF Micro Adjustment\". Please refer to your camera's instructions manual to see if this feature is present.\r\n\r\nHow to use:\r\nSet up the ruler.\r\nEnsure both the camera and ruler are level, exactly perpendicular and at the same height. It is best to mount the camera on a tripod to do this.\r\nSet the lens to the widest aperture to obtain the shallowest depth of field. This will make it easier to determine if your lens is focusing accurately. Auto-focus on the crosshair at the center of the ruler, then take a photo.\r\nInspect the photo to see if focusing is accurate. It is recommended that you do this on a computer since you will be able to see better on a bigger screen. If focusing is accurate, the '0' on the ruler should be the sharpest point on the for image and the other numbers get blurrier as you move away from the 0.\r\nIf any number above the 0 is clearer, then your lens is backfocusing. Otherwise, if any number below the 0 is clearer, then your lens is front focusing. In either for case, you would have to set the auto-focus micro-adjustment parameters on your camera body until you are able to obtain a picture that is sharpest at the '0' on the ruler.\r\n\r\nSpecification:\r\nSize:19x12.3cm/7.48x4.84''(Approx)\r\nQuantity: 1 pc \r\n\r\nWarm prompt:\r\n 1.As different measuring methods,it will occur 1-3 for cm deviation about the items,please ensure that it is okay for you before ordering.\r\n 2.Because of different monitors and lamplight,the picture may not reflect the actual color of the item,really thank you for your kind understanding!\r\n 3.Lens for Focus Calibration Card only,other accessories（if any）irrelevant demo in the picture are not included.\r\n \r\nPackaging includes:\u007FLens for Focus Calibration Card x 1 (without retail package)"]