Feature 1Multifunction Display: The round LCD gauge meter is more integrated and intelligent to display rotate speed, water temperature, turbine, exhaust temperature, intake temperature and so on. 2Remote Control: You can use the attached remote control to set eight functions: set up, parameter, dial, pointer, alarm, competition, fault code, turbo setting, better fits your using habits. 3Adjustable Alarm Valves: The MAXIMUM and MINIMUM values of the monitoring alarm function is adjustable. When the driving parameters exceed the setting valves, the gauge will display the setting valves and send out an alarm signal. 4Intelligent and Accurate to Use: You can switch single and dual gauge at will, 4 interface styles and 7 pointer colors to choose as you like. You can test the acceleration in 100km within 20 seconds with +/0.1s accuracy, more reliable to use. 5Adhesive Installation: Just tear off the bottom adhesive and choose the sticking position. If you want to install on the windshield, you can also choose the inverted display mode, more safer and convenient to use.Item Type: OBD2 HUD LCD DisplayMaterial: ABS + MetalInterface: 10V-15V, OBDII standardCompatible Protocols: ISO15765, ISO14230, ISO9141Power Consumption: Working current 50mA, standby current 5mAApplication: Universal for OBD2 modelsRemote Control Battery: Built-in 1PC button battery CR2025, 80mahDisplay: Rotate speed, water temperature, turbo, exhaust temperature, intake temperature, oil temperature, oil pressure, turbo, air-fuel ratio, battery voltage, G value, throttle opening degree. .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }Package List1 x Meter1 x OBD Cable1 x Cable1 x Remote Control1 x Instruction