Item Type: CC Debugger Material: ABS + Printed Circuit Board Function: Used for TI low power RF system chip. Working Frequency: 2.405-2.485GHz Wireless Transmission Rate: 250Kbaud Power Consumption: <20mA (receiving); <25mA (transmitting) The Chips that the Programmer Can Program and Simulate are: CC1110, CC1111, CC2430, CC2431, CC2510, CC2511, CC2530, CC2531, CC2533, CC2540, CC2541, CC2543, CC2544, CC2545 The Same Device can be Controlled from for SmartRF Studio. Can Control the Following Transceivers from for SmartRF Studio: CC1120, CC1121, CC1125, CC1175, CC1100, CC1101, CC110L, CC113L, CC115L, CC2500, CC2520 Can Also be Used to Program for PurePath Wireless Devices: CC8520, CC8521, CC8530, CC8531 Working: Can work with 7.51A or higher version of for IAR EW8051. 1¡¢CC debugger is a small programmer and debugger for TI low power RF system chips. 2¡¢Can also be used to control selected devices of for SmartRF Studio, very convenient. 3¡¢Can be used with for IAR Embedded Workbench for 8051 (7.51A or higher) for debugging and for SmartRF Flash Programmer for flash memory programming. 4¡¢You can match it with hardware to realize analyser function, and the sniffer board with shell is waterproof and anti static. 5¡¢Can program and simulate a variety of chips, including CC1110, CC1111, CC2430, CC2431, CC2510, CC2511, CC2530, etc.Do not place the product in an environment that is too corrosive, humid and high temperature. 1 x CC Debugger 1 x Sniffer Board 1 x Antenna 3 x Programming Line 1 x Adapter Board 1 x USB Cable