Compatible for J-Link OB ARM Simulation Debugger SWD Programmer STM32 Download Jlink Generation V8 Service Part

١٤٩٫٠٠ ر.س.‏
+ ٩٨٫٩٩ ر.س.‏ الشحن

Compatible for J-Link OB ARM Simulation Debugger SWD Programmer STM32 Download Jlink Generation V8 Service Part

البائع:

١٤٩٫٠٠ ر.س.‏

وفّر ٧٠٫٠٠ ر.س.‏ (31%)

السعر الأصلي

٢١٩٫٠٠ ر.س.‏
في المخزون
+ ٩٨٫٩٩ ر.س.‏ الشحن

سياسة الإرجاع لمدة 14 يوما

طرق الدفع:

  • العلامة التجارية: unbrand

تفاصيل المنتج

تفاصيل المنتج

Compatible for J-Link OB ARM Simulation Debugger SWD Programmer STM32 Download Jlink Generation V8 Service Part

Interface SWD interface four wires, VCC(=3.3V),GND,SWDIO(=TMS=DIO),SWCLK(=TCK=CLK) It is usually designed to be placed on the evaluation board (" on-board ") of major companies, which is why the suffix is "OB". This set of simulation download debugging device named "ARM-OB" has USB communication function, can communicate with PC, the other end through SWD /JTAG way to communicate with supported devices, to complete the debugging simulation download debugging task. Compared with the original OB debugger, our ARM OB simulation debugger lacks JTAG interface and only retains SWD interface, so as to debug and download the MCU of many companies using ARM kernel. Supported kernels. All with SWD interface ARM7911, Cortex-M0M1M2M3M4A5A8A9 and other embedded MCU series. Support MCU producer ST(Stmicroelectronics), Freecale(Freescale), Nuvoton ( Tang), NXP(NXP), TI(Texas Inst ents) Cypress, Atmel, Analog, Fujitsu, Toshiba. Energy Micro, etc. Comparison between J-Link OB and ST-Link V2. Comparison between the J-Link ARM OB and the ST-Link v2. the firmware is stable, can be automatically upgraded, there will be no firmware damage(full-function v8 has firmware problems). U disk size, convenient project is carried on business trips. color: blue Material: PC+metal The connection method SWD mode Function and performance Programming function: can burn FLASH ROM, EEPROM, AFR, etc. Simulation function: Support full speed running single step debugging, breakpoint debugging and other debugging methods, can view IO status, variable data, etc. Programming performance: USB2.0 interface, SWD download, download speed! Simulation performance: USB2.0 interface for simulation debugging, single step debugging, breakpoint debugging, fast response speed! Product characteristics 1, simplified interface,using 4-wire SWD interface: vcc, swdio, swclk, gnd, can download simulation at high speed. 2, com
  • هوية Fruugo: 554244762-1120877867
  • EAN: 9050165582140
السلامة

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

ملصقات سلامة المنتج

CE Mark
تحذيرات السلامة: Important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.

التوصيل

توصيل

يُرسل خلال 24 ساعة

  • STANDARD: ٩٨٫٩٩ ر.س.‏ - التسليم بين الأربعاء 02 ديسمبر 2026 – الثلاثاء 08 ديسمبر 2026

يُشحن من الصين.

الإرجاع

الإرجاع

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل.

عرض سياسة الرد الكاملة