Installation of speed cruise benefits: 1. Frees the feet and can reduce fatigue during long-distance driving. 2. Enhances driving convenience. 3. Helps the engine achieve optimal output torque and may reduce fuel consumption. 4. Many high-end vehicles are equipped with cruise control systems. How to use the speed cruise control system: 1. Cruise activation: When driving normally (speed above 40 km/h), press the ON-OFF button on the cruise control lever. The green cruise indicator light will illuminate. Then move the lever downward (-SET direction), release the accelerator pedal, and cruising will begin. Once activated, speed can be increased or decreased as needed (push +RES to accelerate, turn -SET to decelerate). 2. Cruise suspension: Cruise control is temporarily suspended when the brake pedal is applied (system remains on). When cruise is active, pulling the lever toward the CANCEL direction will immediately disengage cruise control (system remains on). 3. Cruise recovery: Move the cruise lever upward (+RES direction) to resume the previously set speed. 4. Cruise shutdown: Press the ON-OFF button on the cruise lever to turn off the system. The green indicator light will turn off. Color: Black Material: Plastic Part Number: 84632-34011 Applicable Models: - Corolla 2006–2014 - FJ Cruiser 2008–2014 - Highlander 2010–2014 - Land Cruiser 2006–2014 - Prius 2009–2014 - Sequoia 2006–2014 - Part Number 45186-02310-C0 - Suitable for Corolla LEVIN - Dust cover for Corolla cruise control Note: Please verify compatibility before purchase. The applicable models for the cruise control switch and dust cover may differ. Confirm fitment prior to ordering. Package Contents: 1 x Cruise Control Switch 1 x Cruise Control Switch Dust Cover Note: Light and display differences may cause slight color variations between the image and the actual item. Measurement may vary by +/- 1–3 cm.