Digital DDS Dual Channel Function Signal Source Generator Arbitrary Waveform Pulse Frequency Meter 12Bits 250MSa/s Sine Wave 6MHz

Features 1、Using DDS direct digital synthesis technology to generate precise, stable, low distortion output signal. 2、CH1 and CH2 completely symmetrical two channels, each channel can be independently set the parameters. 3、Supports user defined waveform, each arbitrary waveform memory depth 2048*12bits, 250MSa/s sampling rate. 4、Measurement functions: 100MHzfrequency meter and counter function. Signal output amplitude range is 10mVpp- 20Vpp, DC offset adjustment range is -10V to 10V, the resolution is 0.1V. 5、Waveform generator up to 12 bits wide, the output waveform is more delicate, waveform distortion is low. Specification Features: Using DDS direct digital synthesis technology to generate precise, stable, low distortion output signal. CH1 and CH2 completely symmetrical two channels, each channel can be independently set the parameters. Supports user defined waveform, each arbitrary waveform memory depth 2048*12bits, 250MSa/s sampling rate. With pulse trains burst output function, manual trigger, internal CH2 trigger and external trigger three trigger modes that allow the unit to any output 1~1048575 arbitrary pulse trains. Measurement functions: 100MHz frequency meter and counter function. Signal output amplitude range is 10mVpp- 20Vpp, DC offset adjustment range is -10V to 10V, the resolution is 0.1V. Digital signal output function, CMOS output range 0~10V. Waveform generator up to 12 bitswide, the output waveform is more delicate, waveform distortion is low. With full CNC functions, display and adjust of current output signal parameters, such as the amplitude, offset, frequency, duty cycle, and the phase difference of two signals. After connected with computer, user can control signal generator functions and parameters, and can edit and download arbitrary waveform. High accuracy and resolution:frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 10mHz. Tracking function:built in frequency, amplitude, offset, duty cycle, waveform and other parameters follow function, easy to use. Scanning features:frequency linear sweep and logarithmic sweep function, start and end points of scanning can be set freely. Storage features:can store 20 groups parameters set by the user. Operation: key operation, LCD1602 display in English, directly digital setting parameters or continuous adjustment knob. Output short- circuit conservation: all signal output can work above 60s in load short circuit situation. Specifications: Frequency Parameters Frequency Range Sine Wave Normal Modes(Optional): 0Hz~6MHz / 0Hz~12MHz / 0Hz~20MHz / 0Hz~24MHz Square Wave 0Hz~6MHz Triangle Wave 0Hz~6MHz Other Waveform 0Hz~6MHz The Min. Frequency Resolution 10mHz (0.01Hz) Frequency Accuracy (+/-)5*10^(-6) Frequency Stability (+/-)2*10^(-6)/3 Hours Phase Adjustment Range 0~359° Phase Resolution 1° Waveform Parameters Output Waveform Types Sine/Triangle/Square/Sawtooth/Pulse Wave, Lorentz Pulse, Multi-tone, Random Noise, Electrocardiogram, Trapezoidal Pulse, Symplectic Pulse, Narrow Pulse, Gaussian White Noise, Amplitude Modulated Waveform, Frequency Modulated Waveform and User Defined Waveform Sine Wave Harmonic Distortion ≤0.8%(Referent Frequency 1KHz) Square Wave Rise/Fall Time ≤20ns(Referent Frequency 100KHz, 10Vpp) Overshoot ≤7.5% Duty Cycle 0.1%~99.9% Sawtooth Wave Linearity ≥98% (0.01Hz~10KHz) Pulse Wave Pulse Width Adjusting Range 10nS~1S Rise/Fall Time ≤20ns TTL Output Level Amplitude >3Vpp Fan-out >20 TTL Load Rise/Fall Time ≤20ns CMOS Output Low Level <0.3V High Level 1V~10V Level Rise/Down Time ≤20ns Waveform Output Output Impedance 50Ω(+/-10%) (Typical) Output Amplitude ≥20Vpp(No Load) conservation All signals output can work above 60s under the condition of load short circuit DC Offset Offset Adjustment Range (+/-)10V Offset Resolution 0.1V External Measurements Frequency Measuring Range GATE-TIME=1S 1Hz - 100MHz Input Voltage Range 1Vpp~20Vpp Counting Range 0~4294967295 Periodic Measurement 20ns Resolution, the Maximum Measurable 20s Scanning Function Scan Mode Linear Sweep, Logarithm Sweep Scan Object Frequency Scan Time 1s-999s/Step Frequency Setting Range Start Point and End Point can be set arbitrarily Frequency Scan Range It is determined by the sweep parameter settings General Parameters Memory Quantity 20 Location M0 to M19 (01 for default value) Interface Interface Mode Using USB to Serial Interface Communication Speed 9600bps Protocol Command Line Mode, Protocol Complete Open Power Supply Voltage Range Display Display Type LCD 1602 Display Environment Temperature: 0~40°C Humidity: <80% Size 19 * 18 * 7cm / 7.5 * 7 * 2.75in (L * W * H) Weight 577g / 20.36oz Package Size 25 * 21 * 9.5cm / 9.84 * 8.27 * 3.74in (L * W * H) Package Weight 913g / 32.23oz Package List 1 * Function Signal Generator 1 * USB Cable 1 * Power Plug 2 * BNC Clips Cable