Features 3 in 1 Design with IPS Screen: This product integrates digital oscilloscope, multimeter, and signal generator into one device. 3.2in clear IPS display screen, high sensitivity full view display, channel 2 waveform can be set to green, cyan, purple. Signal Generator: Built in waveform signal generator, capable of outputting sine wave, square wave, triangular wave, etc. The voltage amplitude is 2.5V, the frequency is adjustable between 0‑2Mhz, and the square wave duty cycle is adjustable between 1% a High Accuracy Multimeter: Built in true effective value multimeter, supporting software rapid calibration. Able to test DC AC voltage, DC AC current, resistance, capacitance, diode, and on off. When measuring low voltage, resistance, continuity, the osci Digital Oscilloscope: Dual channel oscilloscope, with a bandwidth of 120MHz, and a dual channel mode bandwidth halved to 60Mhz. The sampling rate is 250MSa/s. With perfect triggering function of automatic, single shot, normal. Support sensitivity and tim Sensitivity and Time Base: The oscilloscope will automatically detect the signal and adjust the range. Support manual adjustment of waveforms in both vertical and horizontal directions. Vertical sensitivity represents the voltage in the vertical directio Specification: Item Type: Digital Oscilloscope Model: DSO3D12 Channel: 2 Screen Size: 3.2in Sampling Rate: 250MSa/s Bandwidth: 120Mhz Equivalent Sampling: 500M Rise Time: <3ns Storage Depth: 128K Impedance: 1M Ω Time Base: 5ns-10s Sensitivity: 10mV/div - 10V/div. Maximum Voltage: ± 40V (x1), ± 400V (x10) Trigger Mode: Auto, Normal, Single Trigger Type: Rise, Fall Display Mode: YT, Roll Duration: None, 1s, ∞ Coupling: AC, DC Automatic: Supporting Measurement: 14 Types DC Test: ± 2% XY Mode: Supporting Screenshot: Supporting Frequency: ± 0.01% Single Frequency: Supporting FFT: Supporting Output Waveform Amplifier: 2.5V ± 0.05 Waveform Output Frequency: 5MHz for sin, 1MHz for other. Language: CN, EN Charger: TYPE C 5V Charging Current: 700mA Battery Type: 1 x rechargeable lithium battery, 2500mah. Shipped with built in battery. Multimeter: DC Voltage: 600mV, 6.00V, 60.0V, 600V, 750V, ± (0.5%+3), AC Voltage: 600mV, 6.00V, 60.0V, 600V, ± (1%+3) DC Current: 600mA, 10A, ± (2%+5) AC Current: 600mA, 10A, ± (3%+5) Current Description: 600mA hole with 1A , 10A hole without   Resistance: 600.0Ω ± (1.5%+3), 6.000kΩ, 60.00kΩ, 600.0kΩ ± (1%+3), 6.000ΜΩ ± (1.5%+5), 60.00ΜΩ ± (3%+3). Capacitance: 60.00nF, 600.0nF, 6.000μF ± (5%+5), 60.00μF, 600.0μF ± (10%+5). Diode: 0.0V~3.3V, display OL above 3.3V. Continuity: Sound at 50 Ω and below.  Package List: 1 x Digital Oscilloscope 2 x Test Line 2 x High Voltage Test Line 11 x Accessory 1 x USB Cable 2 x User Manual Package List 1 x Digital Oscilloscope 2 x Test Line 2 x High Voltage Test Line 11 x Accessory 1 x USB Cable 2 x User Manual