Digital temperature controller, heating and cooling thermostat socket LCD temperature controller, 230V, suitable for temperature control in greenhouse

More Convenient Features: Timed start, timed stop, and timed switch; simply plug in the power and select the heating/cooling system to operate, no rotation required, accurate LCD display. Can connect to both heating and cooling systems simultaneously. Heating/cooling differential function can be set separately for temperature control in the event of significant temperature changes. Temperature Alarm: No need to consider temperature changes when the temperature exceeds the limit or the sensor malfunctions. Compressor delay protection function can be used for compressor control and temperature calibration. Wide Applications: This thermostat accurately controls ambient temperature. Widely used in greenhouses, fish tanks, coal crystal heaters, aquaculture, incubators, room temperature control, homes, etc. Intelligent Temperature Control: This thermostat with timer automatically controls the cooling and heating on/off of equipment, featuring intelligent temperature control and intelligent timing functions. Temperature Range: -40~120℃. Intelligent Temperature Sensor: With this thermostat, you can accurately control room temperature. Equipped with a wired temperature sensor for real-time measurement. High-definition LCD display clearly and intuitively displays all data, achieving precise real-time temperature control. Accuracy: ±1%, Timing Accuracy: Maximum 10 minutes. F01: Cyclic Timing Mode. Cyclic timing mode F01 starts timing based on the start time (on) / stop time (off) of the work cycle. F02: Enable Timing Mode. Timing mode F02 is enabled, currently in a disabled (delayed) state. F03: Timer Stop Mode. In timer stop mode, current is on, delay (stop time) is off, and after the stop countdown ends, the output is turned off and disabled. F04: Timer On/Off Mode. In timer on/off mode, the current state is off, delay (start time) is on, and after being on, delay (stop time) is off. After the stop countdown ends, the output is turned off and the operation exits. In timing mode, the timer starts/stops when the start time/stop time is reached. Specifications: Temperature range: -40~120℃; Accuracy: +/- 1%; Timing accuracy: maximum 10 minutes; Rated voltage: 230VAC 50HZ; Rated load: maximum 16A 3680W; Temperature display resolution: 0.1℃; Scope of supply: 1 x thermostat socket. It can display the measured temperature, set the start and stop temperatures to control heating or cooling equipment. Simply plug it in and select the heating/cooling system to use. It has a memory function after power failure and a screen lock protection function.