Features: When water flows through the preset flow channel, it pushes the magnet to displace. As it moves near the reed tube, the reed tube conducts upon sensing the magnetic field. When there is no water flow, the magnet returns to its original position via spring force, and the reed tube disconnects when it no longer senses the magnetic field. Thread: G1/4 inch, startup flow: 300ml/min, response time: less than 1 second. Lightweight, compact design, stable performance, low water pressure start, easy to install, safe to use. Ideal for use in water dispensers, water purifiers, water vending machines, and similar applications. Constructed with high-quality materials for durability and long-term use. Specifications: Material: Plastic Applicable water quality: Turbidity less than 1; Fe, Co, and Ni content less than 0.3 mg/L Applicable water pressure: Equal to or less than 0.8 MPa Applicable water temperature: 5–50°C Ambient humidity: Less than 85% Storage temperature: -20–50°C Thread: G1/4 Startup flow: 300ml/min Response time: Less than 1 second Switch type: Normally open Wire length: 50 cm Cable connection strength (outlet end of the body): 20N tensile force applied along the terminal axis for 10 seconds 20N pulling force applied perpendicular to the terminal for 10 seconds (no damage at connection) Hydrostatic pressure: 1.05 MPa for 5 minutes (no leakage or damage) Voltage resistance: Applied between live and non-live parts DC 160V for 1 minute or DC 200V for 1 second (no flashover or breakdown) Maximum closing current: 0.5A Maximum load current: 1A On resistance: 0.12Ω Off resistance: 10¹²Ω Power connection capacity: 0.2PF Package Includes: 1 x Water Flow Switch Note: Please allow 1–3 cm error due to manual measurement. Ensure you are comfortable with this before purchasing. Due to differences in monitor displays, the image may not reflect the actual color of the item.