Electric Screwdriver Screwdriver Screwdriver Electric Screwdriver, Rechargeable Screwdriver, 3.6V Lithium Battery, Mini Electric Screwdriver SetThe product is shipped according to the color or size of the main image on the product page.Model mini electric screwdriverPower source type: rechargeable lithium battery technologyweight 0.4 (kg)maximum torque 3 (nm)Door, screw installation, household usePower supply voltage 220VScrewdriver typeRated speed 600 (rpm)Rotation direction bidirectionalTotal length 150 (mm)No-load speed 180 (rpm)Handle type Pistol typeMaximum screw diameter 10mmDrive shaft / chuck 6mmPower D Rated input 00 (W)Rotation speed 600 (rpm)Tightening torque 3Dimensions 135 * 120 (mm)Mini Specifications Orange Electric ScrewdriverName: 3.6V Electric ScrewdriverRated voltage: 3.6V 200MAHInput voltage: 220V / 50HzSpeed indicator: 200 rpmMaximum torque: 3N/MCharging time: 3.0-5.0 hoursSingle machine weight: 0.318 kgReminder: When charging for the first time, the machine needs to be charged for 5 hours, and the indicator light is on during chargingThe red indicator light is always on. When it is full, the red indicator light is offStandard configuration: 1 guest + 1 charging cable + 44 accessories + 1 plastic box. Matching Accessories:4 x 50mm Long Drill Bits + 28 x 25mm Short Drill Bits + 8 x 1/4 Sockets + 2 x Hexagon Drill Bits + 1 x Magnetic Rod + 1 x Universal JointInstructions for Using Power ToolsWhen using power tools, to reduce accidents such as fire, electric shock and injury, you should pay attention to the basic safety items listed below; Please read the following safety features carefully before proceeding.1. Keep the workplace clean and do not use power tools in dirty workplaces and work surfaces.2. Do not use power tools in dark and humid places. Keep it away from rain. Do not use in combustible liquids or in the presence of combustible gases.3. Do not leave children and idlers in the workplace. Do not allow the rollers to come close to touch tools or electrical cables.4. When the power tool is not in use, it should be stored in a dry place out of reach of children, and should be locked.5. Maintain appropriate speed and pressure speed to make the tool operation safer and more durable.6. Operate within the specified application range and do not exceed the compliance for overload processing.7. You should maintain a correct posture when working, you should stay firm and you should not reach over the tools to pick things up.8. Knives should be lubricated and replaced from time to time to keep them sharp and the wires should be checked regularly.9. When the tools are not in use or for maintenance, when changing devices and knives, be sure to unplug the power plug.10. Check before turning on the switch to operate the machine. It is necessary to check whether the cutting tool adjustment tools and the fixing wrench are completely removed.11. To avoid accidental starting, you must check whether the tool switch is off before inserting the plug into the power source. After turning on the power, do not press the switch frequently with your finger.12. Outdoor extension cords, when using tools outdoors, be sure to use external extension cords.13. Do not wear loose clothing or accessories to avoid entanglement when the tool is running. Rubber gloves and non-slip industrial safety shoes must be worn outdoors. Protective cap.14. Use safety glasses and wear a mask when there are too many chips and dust.15. Do not step on the wire, do not drag the wire moving tool, and avoid touching the hot object and sharp metal edge or getting the grease wet.16. Secure the workpiece. Use pliers to fix the workpiece to be cut, which is safer than holding the workpiece by hand.17. When repairing or replacing parts, be sure to use the parts specified by the original factory and send them to a professional replacement repair center.18. Pay attention to the workpiece and the tool in unison. Tools should not be used when fatigued.19. Before using the tool, you should carefully check whether the tool cover or other parts are damaged and check whether the degree of damage will affect the normal operation of the tool. Check whether all moving parts are in the correct position, whether the parts are fixed, etc. If the cover or other parts are damaged, if there is a problem with the tool switch, please ask a specialized shop to repair or replace it. Do not use a power switch that is not working properly to activate the tool. 20. During work, your body should not come into contact with grounded metal objects, such as iron pipes, radiators, refrigerators, etc.