1. Name: Electronic drain valve 2. Model: 507292 3. Indicator lamp: LED indicating power on / off 4. Voltage range: +/-10% 5. Protection: IP65 6. Insulation: H 7. Maximum working pressure: 1.6Mpa 8. Maximum temperature: 90 Celsius 9. Temperature: -40 Celsius to 60 Celsius 10. The largest current consumption: 4mA 11. Power supply voltage: 24-240V AC/DC 50/60Hz 12. Discharge time (ON): 0.5--10 seconds 13. Time interval (OFF): 0.5--45 minutes 14. Widely used in separators, dryers, gas tank, drip legs and other compressed air system components 15. Clean the compressed air system installation 16. Note the direction when installing the valve: outlet do not use the hose not against the impact of air 17. Power supply voltage should be with the drain valve voltage: the must be connected to connector "1" when using DC 18. When leave the drain valve has connected to the cable, brownness is fiery L, blue is the N, yellow-green color is the safety ground wire GND 19. Be to tighten the long screw on the terminal box to prevent water from burning 20. Warning 21. When installing the electronic drain valve, make: Compressed air has been emptied (is, under pressure); The power supply has been switched off 22. Colour: Gold + black 23. Material: metal 24. Size: 5 mm 25. In / out port size: 1/2inch 26. Package Contents: 1 x Electronic drain valve 27. Only the above package content, other are not included 28. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm