Et826 2 In 1 Automatic Range Multimeter Color Screen With Oscilloscope Waveform Display Testing Tool

Item Type: Multimeter_x005F_x000D_ Material: ABS_x005F_x000D_ Model: ET826_x005F_x000D_ Battery: 1.5V 3 x AA Batteries (Not Included)_x005F_x000D_ Purpose: Used in electrical parameter testing_x005F_x000D_ Technical Parameters_x005F_x000D_ DC Voltage400mV;4V/40V/400V/1000V_x005F_x000D_ AC Voltage 400mV;4V/40V/400V;750V_x005F_x000D_ DC Current40mA/400mA;4A/10A_x005F_x000D_ AC Current40mA/400mA;4A/10A_x005F_x000D_ Resistance400/4K/40K/400K/4M/40M_x005F_x000D_ Capacitance0.1nF~100F;10000F_x005F_x000D_ Frequency5HZ~5MHZ_x005F_x000D_ DiodeOpen Circuit Voltage 1.5V_x005F_x000D_ _x005F_x000D_ _x005F_x000D_ How to Use:_x005F_x000D_ (1) Before using the multimeter, you should perform "mechanical zero adjustment", that is, when there is no measured power, make the pointer of the multimeter point to the position of zero voltage or zero current._x005F_x000D_ (2) In the process of using the multimeter, you cannot touch the metal part of the test pen with your hands. This can ensure the accuracy of the measurement on the one hand, and ensure your safety on the other hand._x005F_x000D_ (3) When measuring a certain amount of electricity, it is not possible to transform gears while measuring, especially when measuring high voltage or large current, you should pay more attention. Otherwise, the multimeter will be destroyed. If you need to change gears, you should disconnect the meter pen first, and then measure after the gear shift._x005F_x000D_ (4) When the multimeter is in use, it must be placed horizontally to avoid errors. At the same time, attention should be paid to avoid the influence of external magnetic fields on the multimeter._x005F_x000D_ (5) After the multimeter is used, the transfer switch should be set to the maximum range of AC voltage. If you do not use it for a long time, you should also take out the battery inside the multimeter to prevent the battery from corroding other components in the meter.