Item Type: Pneumatic spray gun_x000D_ Material: Stainless steel + black diamond_x000D_ Capacity: 400ml _x000D_ Paint Supply Method: Gravity type_x000D_ Working Pressure: 0.25-0.4 (Mpa)_x000D_ Diameter of Spray Hole: Approx.1.5mm / 0.1in_x000D_ Air Connector Size: Approx. 1.1cm / 1/4 inch_x000D_ Paint Spraying Volume: 435 (ml/min) _x000D_ Effective Spray Distance: Approx. 20cm / 7.87in_x000D_ Air Consumption: Approx. 5-10 (l/min) _x000D_ Scope of Application: Latex paint, primer and top coat spraying_x000D_ Instructions: _x000D_ 1. Pour the well-proportioned paint into the paint pot and connect it with the feed joint_x000D_ 2. Connect compressed air to the air inlet connector_x000D_ 3. Pull the trigger and adjust the proper working air pressure (3.5-4.5bar)_x000D_ 4. Adjust the amount of paint and spray width (adjust as needed)_x000D_ 5. Parallel and vertical spray on the clean surface (spray distance is about 20cm/)_x000D_ The Difference Between Upper and Lower Pots:_x000D_ _x000D_ 1. Lower pot S is suitable for spraying horizontally or less than 45 degrees up and down_x000D_ 2. The upper pot G can be rotated, suitable for 360-degree spraying_x000D_ 3. The lower pot capacity is large, the upper pot capacity is small, according to the use scene to choose