1. This product is used to replace 1.2M floppy drives in various industrial control equipment. It is compatible with floppy drive interfaces; users can directly connect the drive to the original floppy drive interface. It uses a USB flash drive instead of a floppy disk, avoiding many of the disadvantages of floppy disks. 2. Equipped with a USB interface, allowing direct connection of USB flash drives to replace floppy disks. 3. Supports USB flash drive partitioning, meaning one USB flash drive can be used as 100 floppy disks, facilitating file management and saving costs. 4. Theoretically supports various operating system BIOSes supported by floppy drives; software modifications are usually unnecessary. 5. Supports booting the operating system from the USB flash drive (mimicking floppy drive boot function; floppy disk booting must be enabled in the CMOS). 1. Complies with floppy drive specifications, wiring is the same as a regular floppy drive, uses a single 5V power supply, and has a 34-pin floppy drive interface. It can be connected to the motherboard's FDC port using a standard floppy drive cable. 2. Supports unlimited USB flash drive capacity. Due to the influence of floppy drive specifications, the read and write speeds of USB flash drives are similar to those of floppy disks. 3. Like regular floppy drives, the floppy drive driver does not support hot-swapping, but the USB flash drive itself can be hot-swapped. 4. Supports write protection for the USB flash drive itself, with the same write protection function as a regular floppy disk. 5. Supports A and B drives. Multiple floppy drive drivers and regular floppy drives can be connected to the system, or a mixture of both can be used. Application Areas: For host devices, our emulated floppy drive can be used in various 1.2M floppy drive devices still in use, such as computers, embedded systems, computer embroidery machines, computer label machines, and computer jacquard machines. For storage devices like USB f