Fiber Optical Thermal Stripper M9, for Bare Fiber

[Efficient stripping] With its multi specification adaptability, the fiber thermal stripping pliers can efficiently process various types of optical fibers such as bundled fibers, bare fibers, and ribbon fibers (1-48 cores), with a stripping length accurate to 0.1mm, avoiding damage to the fiber core. [Widening the limit blade] By increasing the contact area of the blade and optimizing the width of the limit groove (20mm), the stability of fiber fixation is improved, the risk of offset is reduced, and the accuracy of stripping is ensured. Precise control, removing the coating layer without leaving any traces. Compatible with 1-48 core optical fibers, significantly improving operational stability and stripping accuracy. [Dual heating mode]adopts intelligent temperature control technology and has two working modes: low temperature mode (110 ℃ -145 ℃) is suitable for rapid softening of ordinary optical fiber coatings, and high temperature mode (120 ℃ -160 ℃) is specially designed for high-temperature special optical fibers. [ Power ] Equipped with a 3500mAh rechargeable lithium battery, it can be used approximately 400 times when fully . Color: As Shown Material: ABS Package Contents: 1Set x Clamp-on Fiber Optic Thermal Stripping Pliers Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.