MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash High-precision Current Sense (90A continuous, 220A peak) Input voltage range: 8~36V (3~8S LiPo) w/TVS protection Continuous current 2 Amps, 3A Peak for BEC 5V output Voltage adjustable, 5V Default, 6V or 7.2V via jumper for BEC Vx output FC Specifications ICM: 42688-P (SPI1) & ICM42688-P (SPI4) Baro: Infineon DPS368 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card slot (SDIO) USB/Beep Extender with Type-C(USB2.0) Dual Camera Inputs switch 5V/9V(12V) for Camera/VTX power switch Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot) ADC VB2 voltage divider: 1K:20K ADC AirSpeed voltage divider: 20K:20K Static power 160mA@5V FC Firmware ArduPilot(ChiBiOS): MATEKH743 INAV: MATEKH743 PDB Current Sensor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot) Sense resistor: 90A continuous, 220A peak. Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, AirSpeed Output 5.15 +/- 0.1V DC Designed for Video Transmitter, Camera, Gimbal etc. 12V option with Jumper pad Color: Blue Material: PCB Package Contents: 1*H743-WING V3 Flight Controller kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.