Feature: 1. HIGH PERFORMANCE: The 3D edge finding locator, which is specially designed for CNC milling machines, with high accuracy and good structural stability. 2. MULTIPLE FUNCTION: The GND is connected with the output signal line, after the signal is obtained, the macro program is used to realize automatic centering, record coordinates, etc. 3. AUTO MEASURING: Online automatic measurement can be realized after connection, and it can be used as an acousto optic beam splitter in 5 directions after offline. 4. ALUMINUM ALLOY: The edge seeker is made of 7075 aluminum alloy material, the surface is anodized, wear and corrosion resistant, and has a long service life. 5. WITH BATTERY: The 3D edge locator has built in 1000mAh lithium battery, and is equipped with a data cable, which automatically charges after connecting. Specification: Item Type: 3D Edge Finder Material: 7075 aluminum alloy, anodized surface Edge Finder Outer Diameter: Approx. 39mm / 1.5in Probe Length: Standard approx. 20mm / 0.8in, user can replace Clamping Diameter: Approx. 6mm / 0.24in Clamping Length: Approx. <20mm / 0.8in Repeat Accuracy: 0.01mm XY Stroke: 3mm, it will be damaged if it exceeds the stroke Z Stroke: 1.5mm, it will be damaged if it exceeds the stroke Offline Work: Yes, can be used as a photoelectric splitter Connection Work: Yes, it can be used with the system for automatic centering Connection Method: Approx. 2 meter / 6.6ft data cable Probe Needle: 1mm diameter tungsten steel probe needle Probe: 1.5mm diameter ruby probe probe Waterproof Grade: IP43, can not work in the environment of coolant spray Working Voltage: 6-30V, overvoltage burns, low voltage cannot work Battery: 1000mAh lithium battery (automatic charging online, with built in battery). Package List: 1 x 3D Edge Finder1 x Cable1 x Wrench1 x Storage Box Note: Bumping will cause irreversible damage and affect accuracy.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.