High Precision Smart Clamp Meter ACDC 100A 6000-Count Multimeter 1. DC voltage rangeresolutionaccuracy: 0.001-610 V 0.001 V +- (0.8% + 3) 2. AC voltage rangeresolutionaccuracy: 0.001-610 V 0.001 V +- (1.0% + 3) 3. DC current rangeresolutionaccuracy: 0.001-100 A 0.001 A +-(3%+5) 4. AC current rangeresolutionaccuracy: 0.001-100 A 0.001 A +-(3%+5) 5. Resistance rangeresolutionaccuracy: 0.1ohm-60 M ohm 0.1 ohm +-(1.2%+3) 6. Capacitance rangeresolutionaccuracy: 0.01 μF-60 μF 0.01 μF +-(3.5%+8) 7. Frequency rangeresolutionaccuracy: 1 Hz-9.999 MHz 0.001 Hz +-(2.0%+10) 8. Duty cycle rangeresolutionaccuracy: 10.0-95.0% 0.1% +-3.0% 9. Temperature (Type K thermocouple) rangeresolutionaccuracy: -50 to 1000 degrees Celsius 1 degree Celsius +-(2.0%+3) 10. Ambient temperature rangeresolutionaccuracy: 0 to 50 degrees Celsius 1 degrees Celsius +-2 degrees Celsius 11. Buzzer activation: the buzzer sounds when the measured resistance is less than 50 ohms 12. Diode: automatic recognition of diodes with voltage less than 3V 13. Auto-off: 15 minutes 14. Other functions: non-contact voltage detection, live wire detection 15. Power supply: built-in 3.7V 400mA lithium battery 16. Charging port: Type-C 17. Size: about 19.2 x 4.58 x 3 cm 18. Weight: about 122 g Features: 1. No need to strip wires or interrupt circuits; simply clip thick or thin wires into the openings to instantly display AC and DC current readings 2. NCV (Non-Contact Voltage Detection) for safer voltage testing without physical contact 3. Full-range intelligent burnout protection; the meter won’t burn out even if the wrong range is selected, ensuring safer use 4. Intelligent burnout protection chip with full-range overload protection; automatically starts measuring upon power-on 5. 2.8-inch HD LCD screen for clear readings 6. Silicone buttons for easy operation Package list: 1. Tester x 1 2. Test leads x 2 3. Type K thermocouple x 1 4. Charging cable x 1 5. Storage case x 1 6. User manual x 1