Product name: PS5 console multi-function cooling fan base bracket PS5 game handle Blu-ray charging standProduct parameters:1. This product is a new type of intelligent multi-function base, which can be installed in the P-5 console to dissipate heat from the console, and can be used normally by using special functions2. Cooling fans: There are three high-speed fan bases at the back, which can speed up the internal air circulation. The console can dissipate heat.Fan gear switch: You can turn the fan on and off, and adjust the wind. When you press the switch, you can change the working state of the fan, namely: fast gear medium speed gear slow gear off cycle); fan gear indicator light: "red/orange/green" indicator light, the indicator light uses To indicate "fast/medium/slow" gear speed of the three fans3. When the handle is charging, the orange breathing light on the handle will emit an orange light. When the breathing light on the handle is off, it means that the P-5 controller is fully charged.Note: The P-5 controller may not charge if the handle is unplugged while charging, reaching about 80% or higher and then charging, because the controller has a battery protection feature. It will not continue to charge until the handle battery is below 80%Product parameters:Input voltage/current: DC 5V/3.0A (with special cable);Charging output voltage/current: DC 5.1V 600mA*2;USB1/USB2 output: DC 5V 700mA~1000mA *2 (If there is no controller charging, the maximum output of each USB port is 1000mA, if two P-5 controllers are charged at the same time, the maximum output of each USB port is 700mA );Built-in three cooling fans, the maximum fan speed:Fast gear: 55001100r/minMid-range: 4500900r/minSlow gear: 3500700 r/minController charging time: about 4H-4.5H.Product size: 246*194*40mm.Product material: ABS.Accessories include: 1*USB to Type-C charging cable, 1*base fixing screw.Package size: 20*25*4cm, 450g