Warm reminder: The use temperature is generally increased by 15 degrees, which is suitable for bathing, hand washing, kitchen washing, etc. in spring, summer and autumn. For details, please refer to the specific water pressure and ambient temperature; the power of the water heater is constant at 3500w. The greater the water flow, the lower the temperature, and the smaller the water flow, the higher the temperature. Please read all instructions carefully before installing and using this water heater. Help you quickly master how to use it and enjoy the enjoyment that high-quality life brings to you. Our products have passed the international quality system ISO9001 and comply with: IEC 60335-1:2004(Ed4.1). 1) & IEC60335-2-35:2002 and other related standards. Note: The power of this small kitchen appliance is only 3500W, which is mainly suitable for hand washing dishes. If the water temperature is not enough, the water pressure can be adjusted. Note: 1. You need to buy your favorite faucet to install this water heater. 2. When using it for the first time, please drain the water before turning on the power. Features and functions: 1. Instant heat, high heating efficiency, high endurance 2. Multiple safety protections for dry burning and overheating 3. Pure resistance load, no inductance, no electromagnetic radiation, environmentally friendly and pollution-free. 4. Energy saving, heating while water is flowing in, almost no energy loss, heating efficiency as high as 96%. 5. Adopt advanced water pressure sensing flow switch, no heating without water, and resistant to dry burning. 6. The power level is optional to meet seasonal needs, save electricity and make life economical. 7. Easy to use, no need to store water, preheat, keep warm or wait. 8. Suitable for homes, hotels, bars, offices, schools, hospitals and other places that require hot water. 9. It can be started with extremely low water pressure. Note 1. The first capital letter of the product code represents the business unit. 2. The second capital letter of the product code represents the product category. .3. The third and fourth digits represent the product development time to distinguish different products, from 01 to 994. The fifth capital letter of the product code represents the difference in design changes, from A to Z. 5. The "-" in front of the character symbol is the abbreviation of the product code name, and the "-" behind it is the product design parameter. Technical parameters and specifications: Rated voltage AC220V, rated frequency 50Hz/60Hz, rated power 3500W, suitable for water pressure 01MPa-06MPa, waterproof grade IPX4, connected flow rate 1.5L/MIN15, minimum waterproof resistance 1300cm, electric shock protection grade, heating system bare heating element, rated water pressure 0MPa start-up Pressure 0.05MPa Temperature range Normal temperature +15 Cable diameter 31.5mm2 Water connection: G 3/8" Safety precautions: 1. 1. The water heater must be reliably grounded; it is prohibited to disassemble the grounding device. 2. It is prohibited to install and use the water heater upside down. 3. Power supply The rated current of the switch cannot be less than the rated current of the water heater. When used for the first time or out of service for a long time, the device must be filled with water before power can be turned on. 5. If the water in the device may freeze, please confirm that the ice in the water heater has frozen Do not turn on the power before thawing. 6. When the water heater is not in use, please turn off the power and close the water inlet valve. 7. If the power cord is damaged, it must be replaced by the maintenance department or professionals. .8. When the water heater is clogged, turn off the power and clean it. Water filter and water outlet shower. 9. The socket must not be connected to any faucet or connector that is not recommended. 10. When the water temperature is 15C, the resistivity of the water should not be less than 1300*cm. Reasons for low water temperature: 1. The voltage is too high Low. Solution: Check whether the power supply voltage is too low. 2. The drainage volume is too high. Solution: Adjust the water valve to reduce the drainage volume. 3. The power and gear are too low, try to increase the power and gear.