Keyless Entry Car Alarm System Push Button Remote Start System Kit for Fuel Vehicle DC12V Item Type: Keyless Entry Car Alarm System Material: ABS Voltage: DC12V PKE Automatic Induction Function: 1. When the car parked and locked: With the remote control close to the driver's door 1 to 2 meters, the door automatically unlocked, the direction light flashing once prompt 2. Automatic sensor lock the door: Turn off the car, close the door, leave the vehicle with the remote control for about 3 to 5 meters, the door automatically locks, and the direction light flashes twice. 3. Temporarily turn off the PKE sensing function: When the door is locked, press the lock key once to temporarily turn off the PKE sensing function, and press the unlock key to return to normal. 4. Permanently turn off the PKE sensing function: In the state of starting the vehicle, press the remote control lock and unlock key to permanently open and close the PKE sensing function. Manual Remote Control Function: 1. Press the unlock button once. The door is unlocked and the direction indicator blinks twice. 2. Press and hold the remote control unlocking button for 3 seconds to open the trunk 3. Press the trunk button twice to open the trunk. 4. Press the lock button once, lock the door, and blink the direction light once. 5. Long press the lock button for 3 seconds, the direction light flashes, and you can find the location of the vehicle. Other Functions: 1. Electric lock pulse and air lock pulse are optional. 2. Positive and negative power output of the tail box can be selected. 3. Lift window signal output. 4. Automatic lock, automatic lock off. 5. LED status indicator 6. Can be programmed to learn remote control. Single Remote Control Built in Battery: 1Pc Battery Type: Button Battery Battery Model: CR2032 Single Battery Capacity: 240mAh Remote control with built In battery (already installed on the remote control) Applicable Vehicle: Suitable for 12V Fuel Vehicles