Lpq-2 Automobile Exhaust Analyzer Detector Exhaust Analyzer Oxygen Content Workshop Inspection Performance Testing

١٬٧٤٩٫٠٠ ر.س.‏
+ ٥٦٫٤٩ ر.س.‏ الشحن

Lpq-2 Automobile Exhaust Analyzer Detector Exhaust Analyzer Oxygen Content Workshop Inspection Performance Testing

  • العلامة التجارية: Unbranded

Lpq-2 Automobile Exhaust Analyzer Detector Exhaust Analyzer Oxygen Content Workshop Inspection Performance Testing

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٢٬٤٩٩٫٠٠ ر.س.‏
السعر: ١٬٧٤٩٫٠٠ ر.س.‏
أنت توفر: ٧٥٠٫٠٠ ر.س.‏ (30%)
البائع:
١٬٧٤٩٫٠٠ ر.س.‏
+ ٥٦٫٤٩ ر.س.‏ الشحن

في المخزون

نقبل وسائل الدفع الآتية

الوصف

LPQ-2 Automobile Exhaust Analyzer Detector Exhaust Analyzer Oxygen Content Workshop Inspection performance testing 1. Introduction to the instrument LPQ-2 Automobile Exhaust Gas Analyzer is to analyze the oxygen content in the automobile exhaust gas, so as to judge the oxygen concentration in the automobile exhaust gas. Whether the emissions of carbon dioxide (Co) and hydrocarbons (HC) meet the requirements of national standards: it can also be determined from the oxygen content of exhaust gas (%)size The instrument is specially designed for automobile maintenance and repair departments, and can meet the needs of exhaust gas. It has a compact structure, It is easy to operate, easy to use and low in price. It is an ideal testing equipment for the automobile maintenance and repair industry. 2. Technical parameters 1. Measuring range: 0---25% 2. Measurement accuracy: soil 1% 3. Working environment temperature: 0C~45C 4. Relative humidity: 85% 5. Response time: 15S 6. Working voltage: AC220V 3. Working principle The instrument adopts the plate method diaphragm type oxygen electrode sensor; pure platinum is the cathode, pure silver is the anode, after oxygen enters the sensor, oxygen. Oxygen molecules in the sensor pass through the diaphragm to reach the cathode, and a chemical reaction occurs under an appropriate polarization voltage, so that the sensor electrode current is proportional to the gas After the oxygen content in the body is amplified, the meter can directly read the percentage of oxygen. 4. How to use 1. Debugging: (1) Press the power switch and the power indicator light is on (2) Turn on the air pump to inhale fresh air, preheat for 15 minutes, then adjust the ''value'' knob, so that the display shows 210, that is, the atmospheric oxygen content is 21% (the last digit is a decimal) within the range required for the test, pay attention : The test range referred to here is to adjust the altitude of the test together. For example, if the current instrument is located at an altitude of 1500 meters, the test range needs to be adjusted to 176 and 17.6%. In general, adjust the display to the 210 range. 2. Test: Car 0 Beam Pollution Test When the engine is at working temperature, the engine accelerates from 0 speed to 70% of the rated speed, maintains it for 60 seconds and then drops to 0 speed for measurement. see debug A good instrument is connected to the air intake pipe with a probe on it, insert the probe probe into the exhaust pipe of the car, the depth is not less than 200m, at this time the instrument switch And the air pump switch should be in the open state. After 15 seconds, the display shows a stable value and then reads the displayed value. This value is the value of the car exhaust. oxygen content. Under the 0-speed test, when the oxygen content in the exhaust gas is below 14%, the Co and HC emissions meet the national standards.
  • هوية Fruugo: 335385254-738536510
  • EAN: 6011254738964

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

ملصقات سلامة المنتج

CE Mark
تحذيرات السلامة: Please note that the product is safe under normal use conditions. However, improper use may lead to hazards such as damage, injury or other safety risks. Please read and follow the instructions carefully.This product complies with EU safety standards. However, for your safety, if any abnormality (such as strange smell, overheating, loose parts, etc.) is found during use, please stop using it immediately.In accordance with the EU General Product Safety Regulation, we remind you that this product is only suitable for [specific applicable people / scenarios]. Use in non - specified people / scenarios may bring potential safety hazards.

التسليم والرد

يُرسل خلال 24 ساعة

  • STANDARD: ٥٦٫٤٩ ر.س.‏ - التسليم بين الأربعاء 12 نوفمبر 2025 – الجمعة 21 نوفمبر 2025

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Chen Meiban
  • Quan Zhou Shi Chao Yue Dian Zi Shang Wu You Xian Gong Si
  • Room 1701, 3A, Heyuan, Donghai Street, Donghai Street, Fengze District, Quanzhou City, Fujian Province
  • QuanZhou
  • CN
  • 362000
  • kkll9965@outlook.com
  • 13192975727

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149