Voltage Output: 0-10V, precision is 0.01V, rotate the encoder knob to adjust output voltage, can be calibrated.             Current Output: 0-22mA, precision is 0.01mA, rotate the encoder knob to adjust output current, can be calibrated.             Multiple Display: just push the small botton to switch the display mode between voltage and current, you can also follow the instructions to switch 0-100 percent or 0-50HZ display.             signal generator is designed to simulate 0-10V voltage signal and 0/4-20mA current signal for PLC and panel Debugging, Device Testing, Frequency Converter, Flow Valve, ect. It can display 4 different types of digit, 0-10V voltage, 0-22mA current, 0-100 percent and 0-50HZ. It will play a important role in your electronics work.             Power Supply             3 ways: built-in rechargeable battery, external micro-USB-5V, external power DC 15-30V, each way makes the generator work             How to judge whether the module device is active or passive.Common methods below:             1. Internal principle of the device, it is passive if "I+" is 24V+; it is active if "I-" is 24VG;             2. Use a multimeter to measure the voltag between "I+" and "I-", it is active if the vaule is 0V; it is passive if the vaule is 24V.             Colour:Black             Material:plastic             Size:100x60x25mm              Package Contents:             1*Signal Generator             Only the above package content, other products are not included.             Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.