Machinery On/Off Operation Push Button Switch Waterproof AC 220V/380V 10A

Model: KA0-10KHType: ON/OFFVoltage Current: AC220V / 380V 10AInsulation resistance: 200MAppearance size: 90 * 56 * 60 mm / 3.5 * 2.2 * 2.4 inchDistance Between Mounting Holes: 78mm / 3.1inWeight: Approx. 120g / 4.2ozThis switch is designed without NC, can control your motor directly, inner screw terminals ensure wiring. The control switch presses the green button, the button lock switch is on, the red button is pressed, the green button is on, and the switch is off. This switch is a commonly used equipment switch in many fields, and it also has the function of isolation.The sensor is compatible with the outer wall of a pipe not metal without direct contact with liquid, and will not be corroded by corrosive liquid such as strong acid and alkali, and is not affected by scale or other debris.ON push buttons are self-locking, OFF push buttons are self-resetting. The control switch is open working mode, the model is KA0-10KH, the distance between the mounting holes is about 7.7cm.Suitable for AC electrical circuits 50Hz (60Hz), voltage up to 380V, 220V. Both 220V single phase wiring and 380V three phase wiring can be used. The wiring includes the hot wire and the zero wire. The power used by the equipment is less than 1500W. If it is higher than the AC contactor, please cooperate with the AC contactor.It is waterproof control switch, retaining switch, switch drill bit and a push-button machine. Widely used in mechanical equipment, textile machinery, distribution box, ship, operation room, etc. Versatile control switches apply to industrial equipment, production equipment, full cabinets, factory workshops, etc.Direct switch does not require contactor. The control switch is PC flame retardant material enclosure, which is waterproof push button, with plastic protective cover, water and oil proof, for longer use.