Database. Input Voltage Range: 6.8~30V (2~6S LiPo). 1x ESC Power Pad. Battery Divider 1K:20K (Scale 2100 in INAV, 1K:20K in ArduPilot BATT_VOLT_MULT 21.0). Current Sensor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot). Sense Resistor: 90A Continuous, 220A PeakBEC 5V Output. Designed for Flight Controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS Module, AirSpeed. Continuous Current: 2 Amps, 3A Max. BEC 9V /12V OutputDesigned for Video mitter, Camera, Gimbal, etc. Continuous Current: 2 Amps, 3A Max. 12V Option with Jumper Pad. For regulated 9V/12V output, input voltage should be Greater than output voltage + 1V. BEC Vx OutputDesigned for servos. Voltage adjustable, 5V default, 6V or 7.2V via jumper. Continuous Current: 8 Amps, 10A Max. For regulated Vx output, input voltage should be Greater than Vx voltage + 1V. BEC 3.3V Output. Designed for Baro / Compass modules and external 3.3V peripherals. Linear RegulatorContinuous Current: 200mA Fiber Channel SpecificationsMCU: STM32H743VIH6, 480MHz, 512KB RAM, 2MB FlashIMU: ICM42688-PBarometric Pressure: DPS310 (I2C2)Display: AT7456EBlack Box: MicroSD Card Slot (SDIO)7x Uarts (1,2,3,4,6,7,8), built-in inversion.13x PWM outputs (12+LED)6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)3x LEDs for FC STATUS (blue, red) and 3.3V indicator (red)2x I2C1x CANUSB/Buzzer Extender, Type-C (USB2.0)Dual Camera Input 9V(12V) for VTX Power High Accuracy Current Sense, 220A RangeADC VB2 Divider: 1K:20KADC AirSpeed Divider: 20K:20KFC FirmwareINAV: MATEKH743ArduPilot: MATEKH743Color: blueMaterial: ABS Package Contents:1 set of circuit boards Only the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in th