Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

SAR209.00
+ SAR60.49 Shipping

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • Brand: Unbranded

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • Brand: Unbranded
RRP: SAR649.00
Price: SAR209.00
You save: SAR440.00 (67%)
Sold by:
SAR209.00
+ SAR60.49 Shipping

In stock

We accept the following payment methods

Description

1Welding power can be powered by lithium battery or 12V car battery. 2The controller adopts single chip microcomputer control, accurate output pulse, LCD display screen, can display welding parameters. 3The soldering pen and the input wire are connected by Ushaped coldpressed terminals, which is convenient for disassembly and replacement. 4The controller adopts automatic welding mode, while retaining the manual trigger interface, you can choose according to your own usage. 5The power board uses 2 ounces of copper, and the soldering pen wire and the input wire use 10AWG multiwire soft wire to increase the overcurrent capacity. 6Five 300A MOS tubes are driven by imported special chips, and the MOS tubes can be used as fast as 20nS, which can switch quickly to prevent tube explosion. 7The controller is mainly for welding 0.1mm to 0.15mm nickelplated steel strip, and the power input adds a 25V10000uF highfrequency lowresistance capacitor for energy compensation to increase stability.Item Type: Mini Spot WelderProduct Description:1: This controller is mainly used for welding small battery repair power banks, power tools, model airplanes, etc.2: This controller requires users to have a certain electronic basis and safety awareness.3: Although sufficient protection has been done for the drive of the MOS tube, it is inevitable that the explosion tube will appear during use. If there is a explosion tube, just replace one.4: For those with high welding requirements, please change the welding power source. After actual testing, when the battery uses 3S, 40C, 5000mHA, it can weld 0.1mm nickel-plated steel strip and 0.15mm nickel-plated steel strip perfectly. The welding needle needs to be ground into a round head, the pressing force is reduced, and it can also be welded; When the battery uses 12V, 50AH car level, it can weld 0.15mm nickel-plated steel strip perfectly. Note that it is a car battery, not an ordinary lead-acid battery.Size: Approx. 0.1 ~ 0.15mm / 0 ~ 0.01in1 x Spot Welder1 x Connector2 x Power Input Line2 x Soldering PenPlease note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
  • Fruugo ID: 341577521-748850994
  • EAN: 653582880708

Product Safety Information

Please see the product safety information specific to this product outlined below

The following information is provided by the independent third-party retailer selling this product.

Product Safety Labels

CE Mark
Safety Warnings: Not suitable for children under 36 months, Adult supervision recommended

Delivery & Returns

Dispatched within 3 days

  • STANDARD: SAR60.49 - Delivery between Mon 06 October 2025–Mon 13 October 2025

Shipping from China.

We do our best to ensure that the products that you order are delivered to you in full and according to your specifications. However, should you receive an incomplete order, or items different from the ones you ordered, or there is some other reason why you are not satisfied with the order, you may return the order, or any products included in the order, and receive a full refund for the items. View full return policy

Product Compliance Details

Please see the compliance information specific to this product outlined below.

The following information is provided by the independent third-party retailer selling this product.

Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.

  • Chengdu Qingbin Tai Trading Co., Ltd
  • Chengdu Qingbin Tai Trading Co., Ltd
  • No. 1309, 13th Floor, Unit 1, Building 2, No. 68, Zhiquan Section, East Street, Jinjiang District, Chengdu City, Sichuan Province
  • Chengdu
  • China
  • 610065
  • chenghduyubin5542@outlook.com
  • 86 134 21832945

Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.

  • REP Europe GmbH
  • REP Europe GmbH
  • Prinzenallee 7
  • Düsseldorf
  • Germany
  • 40549
  • info@rep-europe.de
  • 49 155 60128437