Convert any standard E26/E27 light socket into motionactivated lighting with this screwin motion sensor adapter. It requires no wiring and provides reliable, adjustable automatic control for indoor spaces. Key benefits Instant automatic lighting: Turns lights on when motion is detected and off after a set interval to reduce wasted energy and provide hands illumination. Easy installation: Screw the adapter into any E26 or E27 socket, install a bulb up to 60W, and the sensor is ready. No electrician or rewiring needed. Custom control: Adjustable timer from 10 seconds to 5 minutes and selectable ambient light threshold from 3 to 2000 lux so lights only activate when needed. Wide detection and reliable performance: 360degree coverage with a 10 ft detection range to catch movement around the fixture. Indoor use: Designed for indoor areas where automatic lighting improves convenience and safety. How it solves common problems Eliminates fumbling for switches in dark spaces by automatically activating lights when you enter. Reduces energy use by turning lights off after a preset interval, helping lower electricity costs. Allows tailored behavior with timer and lux adjustments so lights do not trigger during daylight or remain on longer than . Specifications and compatibility Socket type: E26 and E27 Maximum bulb load: 60W Detection range: up to 10 ft Detection coverage: 360degree Timer: adjustable from 10 seconds to 5 minutes Lux sensitivity: adjustable between 3 and 2000 lux Intended for indoor use only Practical use scenarios Basement or garage: Automatically lights the area when you enter, keeping hands while carrying items. Closet or utility room: Activates the light only when needed and turns off after you leave to save energy. Stairwell or hallway: Provides temporary illumination for safe passage without manual switching. Simple setup, adjustable performance, and broad compatibility make this sensor adapter a practical upgrade for existing indoor light fixtures.