①. These lamps are characterized by a high light output, high reliability and uniform color temperature. The lamp is waterproof, so adverse weather conditions do not affect its functionality. ②. The lamp has a motion sensor that turns on the lighting when activity is detected within the detector's operating range. On the other hand, the twilight sensor reacts to changes in lighting and, in case of insufficient lighting, turns on the lamp. ③. The charging panel can be installed up to 5 meters from the lamp, i.e., you can install the lamp in the attic, garage, basement or other dark place, and the solar battery - outdoors. A cable is used for this. Due to the ability to adjust the slope, the panel can be set at any angle. ④. Convenient lamp control is carried out using a remote control. It has on/off buttons and 4 switching modes:• ON – turn on• OFF – turn off• MODE 1 – Mode 1: when motion is detected, the lamp lights up at 30% of maximum power for 30 seconds.• MODE 2 – Mode 2: when motion is detected, the lamp lights up at 50% of maximum power for 30 seconds.• Mode 3 – Mode 3: when motion is detected, the lamp lights up at 100% of maximum power for 30 seconds.• SOS - The SOS button disables the motion sensor and twilight sensor, the lamp lights continuously until the battery is discharged to approximately 50-70% of power. ⑤. Simple assembly with wall plugs. They allow you to quickly and easily mount the lamp on any type of surface, both on concrete and on wood. The target can be a wall, beam or fence. ⑥. TECHNICAL DATA:black color;material: ABS ;LED quantity: 120 COB;waterproof: IP65;motion detector range: 5 m;working hours: spring: 8-10 am; winter: 6-8 pm;voltage: 1.2V;cable length: 5 m;own power supply from solar panel;operating range from -40 degrees C to +50 degrees C;motion sensor effectiveness: 30 m2.