Wind Generator Controller 12/24V 800W MPPT Wind Charge Controller for Wind Turbine Systems Automatically charges the battery. The controller features an integrated rectifier and brake circuit module, offering improved heat dissipation and reliability compared to traditional designs. Fully sealed waterproof design with IP67 protection rating, ensuring reliable operation even in wet conditions. Note: Ensure the wind turbine generator output voltage matches the battery rated voltage. Follow the correct wiring sequence: connect the battery positive and negative terminals first, then connect the three-phase output from the wind turbine. Connect the battery and wind turbine to the controller according to instructions. Reversed polarity or incorrect connections may cause system malfunction or permanent damage to the controller. Wiring Instructions: 1. Connect the battery positive (red) and negative (black) terminals to the corresponding battery terminals on the controller. 2. Connect the wind turbines three-phase output wires to the three-phase input (green wires) on the controller. Specifications: - Maximum input AC voltage: AC35V - Output voltage: 12V / 24V - Battery charging cut-off voltage: 14.5V 0.3V (12V), 29V 0.3V (24V) - Maximum charging current: 15A (12V), 10A (24V) - Wind generator speed limit voltage: 14.5V 0.3V (12V), 29V 0.3V (24V) - Protection level: IP67 - Static power consumption: 0.008A - Maximum load power: 800W - Maximum allowable wind speed: 12 m/s - Operating temperature range: -35C to 65C - Input wiring: Three-wire system - Control mode: Auto-detect 12V/24V compatibility - Installation: Bolt-on mounting - Do not reverse polarity to prevent damage to the controller Application: Wind charge control systems Color: Blue Material: Aluminum alloy Package Includes: 1 x MPPT Wind Generator Controller Note: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement tolerance: 13 cm.