100% Brand new and high quality This adapter card is theoretically suitable for 6+12 pin wireless modules in Apple computers, but there are too many types of wireless network card modules that Apple computers use this interface, so I cannot list them all. The length of some wireless modules and the screw fixing positions on the tail are different. Please find a way to solve the fixing problem. In addition, with this combination, you must pay attention to whether your computer antenna feeder matches your wireless module and whether your own computer installation space is sufficient after this combination! This adapter card is integrated with a USB data signal line, which definitely supports Bluetooth, but if your wireless network card interface does not integrate a USB data signal line and your wireless network card does not have Bluetooth function, it definitely cannot support the use of Bluetooth function! The realization of the Bluetooth function requires your wireless network card to integrate a Bluetooth module, an adapter card to integrate a USB data signal line, and your motherboard network card slot to integrate a USB data signal line, all of which are indispensable! Different types of wireless network card copper pillars are installed in different positions: H3 position: suitable for wireless network card model BCM94360CS2 H2 position: suitable for wireless network card model BCM943224PCIEBT When this product is shipped, the copper pillar is in the H3 position by default! Note: 1: This product only supports 6+12 pin wireless modules in Apple laptops, and it can also support some wireless modules with the same pins, but please solve the fixing problem yourself. 2: There are many types of interface definitions for NGFF interfaces, such as solid state drives, wireless modules, etc.! They are divided into A-key, B-key, A+E-key, M-key, B+M-key, etc. according to the location. Pay attention to the difference and don't make any mistakes. 3: The adapter card does not need a driver, because the adapter card does not have a chip, there is no chip, so there are no so-called driver and compatibility problems. What you need to install is the driver for your own wireless network card module, the wireless network card module has no driver or the driver is installed incorrectly, it cannot work normally! Package includes: 1Set (As shown in the picture With 2pcs female antenna)