Description: This submersible water pump with a bottom suction cup is excellent for aquariums, hydroponic systems, fish tanks, water gardens and a variety of other applications. The water pump adds more circulation to your aquarium and gives your lovely fish a near-natural environment and a long enough cord for easy installation. Features: [360 Absorption] The submersible water pump can absorb water at a low water level, which can help you easily pump out all the water in the aquarium. [Intelligent Control] When the motor temperature rises, the pump will automatically stop, but the motor will restart after the temperature drops. [Multi-nozzles] The submersible water pump equipped with 13mm, 16mm nozzles, threaded fittings make it more stable. [Handle Design] With the comfortable non-slip handle, it is more convenient to move the water pump or take it out of the aquarium. [Widely Applicable] The submersible pump is perfect for aquariums, fish tank, fountain, hydroponic systems, cooling and circulation systems, etc. Specifications: Plug Type: EU Plug; US Plug; UK Plug(Optional) Material: ABS Color: Army Green Max. Flow Rate: 600L/H H-Max. (Lift Height): 1.2m/3.93ft Power: 15W Voltage: 110V/220-240V Frequency: 50Hz/60Hz Waterproof: Yes Cable Length: Approx. 1.5m / 4.92ft Water Outlet Diameter: 13mm, 16mm Occasion: Aquarium, Fish Tank, Pond Pump Size: 8.2 * 6.6 * 9.5cm / 3.22 * 2.59 * 3.74inch Package Size: 11 * 8 * 8cm / 4.33 * 3.14 * 3.14inch (EU Plug & US Plug); 13 * 10.5 * 9cm / 5.11 * 4.13 * 3.54inch (UK Plug) Package Weight: 252g / 0.55lb (EU Plug & US Plug); 293g / 0.64lb (UK Plug) Package List: 1 * Water Pump 2 * Nozzles Note: 1. Please check the voltage and power of the pump before power on, insufficient power and insufficient frequency would affect the flow rate; 2. Please cut off the power before installing/putting/removing the pump from the water; otherwise, the pump cannot discharge water due to the air in it. 3. Used in water without particles and impurities, NOT for viscous and acid-base liquids. 4. DO NOT dry burn the pump, otherwise it will be damaged. 5. Turn the power on/off repeatedly to remove the air in the pump impeller and pipe. 6. Please clean it regularly in case of debris blockage, the pump would make noise or even short circuit the motor if blocked by debris.