Material: circuit board Color as shown Board size: 5.2 cm * 3.6 cm * 0.3 cm Board weight: 7.5g (includes 11g) 2oz copper, 4-layers & 1.6mm PCB Built-in XT60 Socket Light and durable for intensive usage Quick & Easy Installation Total 6 pairs ESC solder tabs are fit for H or X type frame 5V & 12V Output LED indicators & Short circuit tolerant General: Input voltage range (3S-4S LiPo operation): 9-18V DC Regulated outputs: 5V and 12V outputs ESC outputs: Continuous current: 25A*4 or 15A*6 Peak current (10 seconds/minute): 30A*4 or 20A*6 BEC 5V output: Designed for: RC Receivers, Flight controllers, OSD, and Servos BEC Mode: Linear Voltage: 5.0 +/- 0.1VDC Continuous current: 2 Amps (Max. 2.5A 10s/minute) Output Ripple: 40mV (VIn=16V, VOut=5V@2A load) Short-circuit tolerant: 5 seconds/minute BEC 12V output: Designed for: Video TX or FPV camera with linear regulator BEC Mode: Linear Suggested battery: 4S LiPo (13~18V DC) Voltage: 12.0 +/- 0.3VDC Continuous current: 500mA (Max. 0.8A 5s/minute) Short-circuit tolerant: 2 seconds/minute Package Contents: 1 * PDB Board 1 * XT60 Connector The PDB-XT60 has been engineered to provide the highest performance and reliability in a 36*52mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video transmitters, LEDs, etc. The PDB-XT60 offers an authentic Amass XT60 plug to connect the LiPo pack conveniently. 4-layer PCB Board, high current power and BEC stratification, avoids ground disturbance from BEC power current. This board makes the wiring neat, with the added benefit of having the XT60 option. Stacks cleanly on top of the CC3D with ample space.