PWM Adjustable Controller Board for High-Power Applications, Dual-MOS Module with Trigger Drive Switch, DC 4V-60V Voltage Range

Highlight: The module supports high-level trigger, low-level trigger, switch control, and PWM control. It features dual-MOS parallel active output for lower internal resistance, higher current handling, and stronger power capability. Continuous current rating is 10A at room temperature (600W), suitable for most high-power applications. Wide input voltage range: DC 4V to 60V. Easy to use for controlling high-power devices. Applications include motors, bulbs, LED lights, DC motors, micro-pumps, solenoid valves, etc. With PWM input, it enables motor speed control and LED brightness adjustment. Note: - Only one control signal can be used at a time; do not apply multiple signals simultaneously. - High-level trigger voltage range: DC 3.0V to 24V. Conduction occurs within this range; MOSFET turns off when signal is ≤ 0.6V. Avoid signal voltages between 0.6V and 3.0V, as incomplete conduction may cause overheating or damage. - Low-level trigger voltage range: DC 0V to 0.6V. Conduction occurs within this range; MOSFET turns off when signal is ≥ 3.0V. Avoid signal voltages between 0.6V and 3.0V for the same reason. Specifications: - Operating voltage: DC 4V – 60V - Trigger options: High-level trigger (DC 3.0V – 24V), low-level trigger (DC 0V – 0.6V), switch control, compatible with MCU GPIO, PLC outputs, DC power sources, and PWM signals (frequency range: 0 – 2.5 kHz) - Output capacity: DC 4V – 60V, continuous current 10A (600W) at room temperature; up to 15A with auxiliary cooling - Switching life: Unlimited - Type: Power Controller / Solid-State Relay - Maximum power dissipation: 600W - Operating temperature: -40°C to +85°C - Color: Blue - Housing material: ABS - Dimensions: 46.5 × 29.2 mm - Package includes: 1 × High-power DC relay module