[PROFESSIONAL ASSISTANT]For removing and installing valve cores in . Replace Leaking valve cores quickly and . Dual size to work on charge of R410a or R22 or other retrofit replacements .[-MADE] The valve core remover installer tool is made of solid brass, which is durable and 't rust , and the metal knobs are in anti- knurling design, which is durable and you can use for a long time.[TIME-SAVING]the core tool makes it easy to insert it into the inner valve, so you can control the core, needn't to stop the machine or release the refrigerant, you can remove and install the valve cores conveniently, save hours of evacuation and charging time.Valve core removal wrench basic operation:1.Pull out the dead point on the stem, the valve on the tool, adjust the joint of the tool to the air conditioning interface, and tighten the valve on the air conditioning.2.Make that the tool is connected tightly to the air conditioning valve, then open the valve on the tool. Push the stem into the air conditioning valve and gently rotate the tail knob of the remover. Find the angle to connect the valve core, and then loosen it.3.When the valve core is removed, pull out the stem, the valve on the valve remover, loosen the screw at of the tool and take out the valve core. The work is done!Note: We suggest that removing the valve core, the valve core wrench valve and disconnect the air conditioner internal connection.Specification:Item: Valve Core Remover Installer, R410a valve core removal tool, R22 valve core removal tool, a/c valve core removal tool, HVAC valve, core removal tool, valve removal tool, refrigeration air condition for pressurized mini split system.Service ports: 1/4 Inch and 5/16 Inch SAE FemaleBypass ports: 1/4 Inch SAE MaleColor: yellowMaterial: CopperPackage Contents:1Pc * Valve Core Remover Installer1Pc * Valve Core Remover10Pcs * 5V1 valve core