Rechargeable wall-mounted human body light control smart sensor square night light (warm white light)

Intelligent gradation mode continuously; The color temperature / shading can be adjusted as you want, bright, comfortable and soft, giving you a different life that you want: it can be installed anywhere when people come they will be smart and people will come out automatically; practical, energy efficient, intelligent, quite bright and energy efficient lights with constant brightness; Even if it is almost exhausted, it will not change its brightness due to low power Mistful light design; Diffuser made of fully transparent PC material, the light passes through the fog color filter, and the light is soft and does not affect sleep Strengths of the product: 01. Integrated rechargeable lithium battery of 700 mAh; It can be used for about 90 days after a single load 02. Smart sensor, intelligent sensor system of the human body, it will come on when you come to come, it is so friendly 03. Easy to install, glue and use immediately 04. A variety of modes, three modes are optional, can always be activated, can be disabled, may be the induction of the human body 05. The light is a softer, frosted and atomized lampshade, the unique craft makes the light different from other products 06. Wide range of applications, elegant and generous appearance, high energy brightness, can be used in bedrooms, cabinets, corridors, etc. Product settings: Product template: LB-8127 Material: Acrylic size: 149 * 109 * 45 mm (manual measurement, please allow the error) Light source: 14 LED lamp beads power: 2W Brightness: 160lm Weight: 0.24 kg Detection range: 3 to 5 m Brightness time: about 30 seconds (once the light is turned off, if someone is in the detection range, it can light again) Rechargeable power supply: Universal USB data cable (the full load time is about 3 hours, the standby power can last 10 months; the long light is 5.5 hours, if the light is 10 times per day. Each time 20 seconds, you can use 3 months) field of application: bedroom, wardrobe, cupboard, bathroom, entrance, hallway LED induction pilot for the human body. Three control modes:1. We long light mode: lights during day and night.2 intelligent induction mode Aoto: Human body + light-controlled double induction lamp, when the night is dark, the person comes on and the person moves away after a delay, and it is not necessary to find The switch to light the light in the dark.3. Off mode: No light during day and night. Installation method The first step: Tress the glue 3m and paste it on the rear front of the app step 2: detach l On the other side of the 3M glue glued on the rear shell step 3: Adjust the angle of the applique and paste it directly to the wall (it is recommended to clean the dust on the wall before sticking to the wall) step 4: Once the installation is complete, You can approach or move away from the front wall lamp, rear, left and right to test the intelligent sensor of the wall lamp