RP2350A microcontroller chip designed by for . dual-core, dual-architecture, equipped with dual-core ARM -M33 processor and dual-core Hazard3 RlSC-V processor, the clock running frequency is as high as 150MHz, allowing users to switch between the two architectures flexibly. Built-in 520KB and 16MB on-chip Flash. Type-C interface is adopted, so there is no need to entangle the forward and backward insertion. On-board QMI8658 six- inertial measurement unit (3- acceleration, 3- gyroscope). On-board 8 x 8 RGB LED matrix can display cool lighting effects. Lead out the Dout pin to connect the extended RGB matrix. USB 1.1 host and slave device support Support low-power sleep and hibernation modes Can be identified as a drag-and-drop download program for mass storage through USB. Lead out 25 multifunctional GPIO pins. 1 x HSTX, 2 x SPI, 2 x , 2 x UART, 4 x 12-bit ADC and 16 controllable PWM channels. Accurate on-chip clock and timer temperature sensor On-chip accelerated floating-point library 12 programmable I/O(PIO) state machines for custom peripheral support. Color:As Shown Material:PCB Package Contents: 1 * RP2350 Development Board Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.