Description: for SSA6G is a portable panoramic spect analyzer designed to display signal spect in the frequency range from 35MHz to 6200MHz. The analyzer finds the amplitude and frequency of components of the analyzed process. for spect analyzer is to find the signal amplitude for all widely used technologies: including Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS and GLONASS. Application: for SSA6G is primarily intended for field operation. The device is rugged and light with low energy consumption. It enables service centers and maintenance to perform on-the-spot HF analysis for commissioning and repair works. Moreover, the spect analyzer is a perfect solution for repair workshops and radio amateurs. Principle of Operation: The spect analyzer is a portable device which is connected to the measured circuit and has an power supply. The device has a 3.2Inch color resistive touch screen to display the signal spect and to control the device. The device is controlled by one of these three ways: 1. By buttons and touchscreen on the device; 2. By a smartphone or tablet for Android; 3. By a PC or laptop with for Limitations: The spect analyzer for SSA6G is not a measurement gauge, as it does not have an approved pattern of the measuring equipment. The approval of pattern of the measuring equipment has had a negative effect on the availability and price of the device. For this reason the spect analyzer is officially considered a field indicator. However, the device fully meets all technical requirements. Each device is calibrated against the power and frequency. Additional Information: Essentially, the device is "radio frequency multimeter" or "radio frequency explorer". The device is not for and other for products. Frequency bands are displayed only when it is working with devices for Android or . Frequency bands are not displayed on the screen of the device itself. For the correct operation of