1、With the function of various hardware protection measures. There is overcurrent protection, overvoltage protection, and reverse protection for the power supply and all input and output terminals. 2、Can be integrated with other security systems to configure the total security system, including CCTV, fire alarm, BAS (building automation system) and other systems. 3、Supports different Wiegand reader and can be connected to different readers, supporting ID card reader. 4、There are input / output ports to control the doors, which is connected to a variety of sensors, alarms, exit buttons, electric lock, and other devices. 5、Support a variety of communication function. Uses a serial or TCP / IP communication, to provide a reliable network system. 6、This B / S structure software can manage the system by client PC browser easily, no need to install software on each client. It allows real-time monitoring and control of doors opening and closing of the entire system. 7、Has the interlock function. Link different doors with a special logic that one door is open, others must be closed. 8、Support multi-card operation, which is used to manage visitors or to manage a special place of high security. The doors open when the cards registered in number are read. 9、Support normal open after reading the first card, anti-return, and threat mode. 10、Can use the SDK to integrate the hardware into their existing access control software system or develop new software. Condition: 100% Brand New Item Type: Access Control Panel Material: PCB Color: As Pictures Shown Model: C3-100 CPU: 32-bit MIPS CPU RAM: 32M bit Flash: 256M bit User: 30,000 Event Buffer: 100,000 Power / Current: DC 9.6V-14.4V, rated maximum 1A Card Reader Port: 2ea (26-bit Wiegand, 8-bit PIN burst) Communication: RS485, TCP / IP Input Port: 2ea (exit button #1, exit button #2, button #3, button #4, door sensor #1, door sensor #2, door sensor #3, door sensor #4, auxiliary #1, auxiliary #2, Aux #3, Aux #4) Output Port: 1ea (1 FORM-C relay output, SPDT 5A @ 36VDC / 8A @ 30VAC) 1ea (1 auxiliary FORM-C relay output, SPDT 2A @ 30VDC) LED Indicators: LED indication for communication, power, status and punch card Battery: 1 x CR2032 battery (built-in) Operating Temperature: 0° to + 55°C Operating Humidity: 10% to 80%(relative humidity without condensation) 1 x Access Control Panel 1 x Screwdriver 1 x Mounting Accessory 1 x Instruction Manual