The StickC PLUS2 ESP32 mini IoT development board comes with an ESP32-PICO-V3-02 and a graphical programming kit.

Product Description The M5StickC PLUS2 is an iteration of the M5StickC PLUS, using the ESP32-PICO-V3-02 chip as its main control chip and featuring built-in WiFi functionality. This compact device integrates a wealth of components, including an infrared remote control, microphone, LED lights, IMU (Inertial Measurement Unit), buttons, a buzzer, and more. It features a 1.14-inch TFT screen with a resolution of 135 x 240, driven by the ST7789V2 chip. The battery capacity has been increased to 200mAh, and the interface supports HAT and Unit series products. This small yet powerful development tool is designed to inspire limitless creative possibilities. The M5StickC PLUS2 enables rapid prototyping of IoT products, simplifying the entire development process. Even programming novices can easily use the M5StickC PLUS2 to build interesting applications and apply them to real-world scenarios. Power On: The device can be woken up by pressing and holding the C button for more than 2 seconds or by periodically triggering a signal. After triggering the wake-up signal, the HOLD(G4) pin needs to be set to high level (1) during program initialization to maintain power supply; otherwise, the device will enter the shutdown state again. Shutdown: When there is no external USB power supply, press and hold the C button for more than 6 seconds; or when there is no external USB power supply, set HOLD(GPIO4) to 0 during program operation to achieve shutdown. Features: Based on ESP32-PICO-V3-02-Base, supports WiFi Built-in 6-axis IMU Infrared transmitter Microphone Buttons, 1.14-inch LCD screen Built-in 200mAh lithium polymer battery Expandable socket Built-in passive buzzer Wearable/wall-mounted Application areas: IoT terminal controller Wearable devices STEM education products The appearance of different batches of products may vary slightly, but this does not affect the use. Color: Yellow Material: ABS Package Contents: 1 x StickC PLUS2 IoT Development Board This package only includes the above contents; other products are not included. Note: Light reflection and different monitors may cause the color of the item in the picture to be slightly different from the actual item. Measurement error is +/- 1-3cm.