Thermal Tattoo Transfer Machine Complete Wireless Tattoo Pen with Grip Bandage Transfer Papers 100‑240V UK Plug Item Type: Tattoo Stencil Printer Material: ABS, electronic components Produce Introduction: 1. Tattoo Stencil Printer: Scanning Mode: CIS Effective Scanning Width: Approx. 210mm / 8.3in Scanning Resolution: Horizontal: 8dot / mm Vertical: 7.7line / mm Document Type: FINE, PHOTO Document Size: A5-A4 Document Thickness: Approx. 0.06 x 0.15mm / 0 x 0.01in Recording Mode: TPH Effective Printing Width: Approx. 210mm / 8.3in Power Consumption: Standby 5W Working Environment Temperature: 5℃-35℃ Relative Humidity: 20%-80% Size: Approx. 293 x 171.5 x 72mm / 11.5 x 6.8 x 2.8in Different key combinations for different transfer modes. Depending on the type of manuscript, you can select different transfer modes by setting different key combinations on the panel, You can select different transfer modes by setting different key combinations on the panel. Key Combination: PHOTO, Pure Black Line Draft: off, Pure Black Block Draft: off, Lighter Gray Scale Draft: light, Darker Gray Scale Draft: light Key Combination: DEEPNESS 1, Pure Black Line Draft: off, Pure Black Block Draft: light, Lighter Gray Scale Draft: off, Darker Gray Scale Draft: light Key Combination: DEEPNESS 11, Pure Black Line Draft: light, Pure Black Block Draft: off, Lighter Gray Scale Draft: light, Darker Gray Scale Draft: off 2. Wireless Tattoo Pen: Battery: Built in lithium battery 2400mAh Tattoo Pen Size: Approx. 134 x 33 x 33mm / 5.3 x 1.3 x 1.3in Needle Stroke: Approx. 3mm / 0.12in Needle: 99% of all ink cartridge needles on the market Output: 4.2-12V Adjustment Accuracy: 0.3V Speed: 5V-5625rmp, 6V-6750rmp, 7V-7875rmp, 8V-9000rmp, 9V-10125rmp, 10V-11250rmp, 11V-12375rmp, 12V-13500rmp Wireless power charger for charging: 5V/1A, 5V/1.5A, 5V/3A, do not use 9V/1.5A, 9V/2A, 12V/1.5A, 12V/2A and other fast chargers, in order to avoid damage to the battery. Wireless Charging Time: 2 hours, 4-8 hours (8V) on a full charge. 3. Tattoo Bandage: Bandage Size: Width: Approx. 5cm / 2in Length: Approx. 1.8m / 5.9ft Use: Wrap the grip of the tattoo pen for anti slip effect. 4. A4 Tattoo Transfer Paper: Purpose: Transfer the tattoo pattern to the tattoo area, which is convenient for the tattoo artist to trace, improve the working effect and accuracy of the tattoo artist. Characteristic: A4 transfer paper, transfer machine or hand stroke, transfer clear, full lines. Transfer Paper Size: Approx. 29 x 21cm / 11.4 x 8.3in Transfer Paper Quantity: 10PCS 1. Panel Description: DEEPNESS I: The indicator lights up and the manuscript concentration is set to depth I at the same time as DEEPNESS II The button indicator light will go off. DEEPNESS II: The indicator lights up, the manuscript concentration is set to depth II, and DEEPNESS I The button indicator light will go off. PHOTO: Press this key to switch between picture and fine. If it is picture, the indicator will light up. MIRROR: Press this key to switch between mirror copy and ordinary copy. MIRROR is used by default, if it is a mirror copy, the light will be on. STOP: Stops the transfer. COPY: After inserting the manuscript, press this key to start transferring. POWER: Power indicator, the indicator light will be on after the machine is powered on. ERROR: Indicates the error indicator. The indicator is on when the thermal sensor overheats. 2. Adjust the scanning depth and transfer depth of the machine You can adjust the scan depth and print depth of the machine according to actual needs. The steps are as follows: (1) Long press the STOP button for 3 seconds, the machine drops a sound, and the indicators are all on. (2) Press STOP to adjust the scanning depth. Drop 1 is the deepest and beep 7 times is the shallowest. (3) Press COPY to adjust the transfer depth, drop 1 sound transfer the shallowest, beep 7 times is deepest. (4) Long press the STOP button for 3 seconds, the machine will beep, and the indicator light will recover, that is, the scanning and printing depth will be completed adjust. 3. How to calibrate the machine Machine in the brightness of the image sensor and thermal sensor on the surrounding environment and temperature are very sensitive, will change with the passage of time and natural, copy image and the original image color difference is bigger, please scan the calibration, operation steps are as follows: (1) press the "STOP" button for 3 seconds, can hear the "beep" sound to the machine, all the lights lit up. (2)Insert a flat PIECE of A4 paper into the paper feeder and press the "MIRROR" key to scan and calibrate. (3) Automatic paper feeding during the calibration process, and complete scanning calibration after spitting out a complete white paper. (4) Press the "STOP" button for 3 seconds, hear the machine "beep", all indicators return to normal, that is, the calibration is completed. 4. Usage (1) Power on and turn on the power switch. (4) Set the improved printing mode, press the s