The newly released iSteady X gimbal stabilizer weighs only 0.6 pounds, but it can still carry up to 0.7 pounds of payload. With foldable and ultra-light design, you can carry iSteady X foldable gimbal anytime, anywhere, and record your wonderful adventures without burden. Compared with complex operations and meticulous manual zooming, this smart phone gimbal has 7 different one-key templates, such as start, Dolly zoom, action time-lapse shooting, panorama and so on. Very suitable for bloggers and bloggers. This gimbal stabilizer is compatible with most types of smart phones on the market (width 58-90 mm, thickne le than 10 mm).First start:1. [Phone Settings] Place the phone in the center, and make sure that the phone is close to the bracket to prevent shaking.2. Long pre the function button: when it is turned on for the first time, it will enter the standby state, and the Bluetooth indicator light will flash alternately "red and green".3. Register account: Register your account with a phone number, please select the country code that matches the phone number.4. Connect to Bluetooth via APP: Turn on the phone's Bluetooth, open the APP, and log in to the homepage. Follow the prompts at the top and click "Connect".5. Activate iSteady X: After connecting to Bluetooth, the activation prompt box will pop up. Click "Confirm". After that, you will hear a tone, which means that the stabilizer starts to work.Note:1. When you power on iSteady X for the first time, you need to activate it through the Hohem Pro app. iSteady X will start working after activation.2. Install the phone before turning on the iSteady X. If not, you will hear a beep as a warning.3. Confirm that the three axes are unlocked and flexible, otherwise they will be used in sleep mode.4. Make sure you connect Bluetooth on the app, not the phone's settings.