TM009 Decoration Acrylic Wall Clock 1. Acrylic dial, glossy, not easy to fade 2. Metal baking paint hands, corrosion-resistant, beautiful and practical 3. Laser engraved numbers 4. Silent scanning movement, accurate time, durable 5. Material: acrylic 6. Power supply: 1 section AA batteries (not included) 7. Applicable scenes: living room, study, bedroom, etc. 8. Size: about 28x28 cm 9. Weight: about 360 grams 10. Attention:- There is a protective film on the surface, need to tear off before the wall- When installed, the hour and minute hand aligned with 12 o'clock, you can not dial the hands, you need to adjust the movement in the movement behind the dial to adjust the time of the circle, the hand nut tightness to adjust to the appropriate, otherwise it will be stuck or too loose to go slow or do not go the case- It is recommended to use carbon batteries, do not use alkaline or rechargeable batteries, such batteries have a high current output, affecting the service life of the movement- Transparent acrylic material, the picture lens has a display furniture, the actual no, the specific object shall prevailInstallation method: 1. Take out the accessories (hands, movement, non-marking nails) 2. Take out the hour hand aligned with the 12 o'clock direction, with the thumb while pressing hard 3. Take out the minute hand to align with the 12 o'clock direction, use your thumb to press hard at the same time 4. Insert the second hand to ensure that the three hands are parall 5. Rotate the circle behind the movement to adjust the time 6. Install the battery and hang it on the wall