Universal 4-in-1 Garage Door Opener Remote Control Duplicator, 4-Button Copy Controller for Fixed and Rolling Codes

4 in 1 Remote Control Duplicator. The device can clone up to 4 remote buttons from the same or different remotes allowing you to carry four remote functions in one unit. Each corresponding letter (A, B, C, & D) operates a different remote controlled key. Multi-Use 4 channel remote control system designed for controlling gadgets, cars, homes and garages. Supports simple pairing with original remotes. Clone up to 4 remote signals from 4 different remotes. Compatible wireless remote keys allow individual password storage. Duplicate existing remote controls to maintain a backup key. User-friendly design facilitates simple and quick operation. Specifications: Working voltage: DC12V (Battery not included) Operating Current: 8mA Working frequency: 433MHz Modulation Mode: ASK (AM) Transmission power: 100mW Emission Distance: 100 m Encoding type: Self-Learning Working temperature: -10°C to +50°C Works with the following remote control IC modules (check original remote control before ordering). Remotes should be Fixed code or Learning code. AX5326-3. PT2262. PT2260. EV1527. FP527. PT2242. HT600. HT680. HT6207. HT6010. HT6012. HT6014. AX5326 4. SMC918. PT2240. HT6013. HT12D, etc. Application: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products. How to Program: Step 1: Delete the existing code of the remote duplicator. 1) Click and Hold A and B buttons together - LED will flash 3 times. 2) Keep holding A button and release B button. 3) Keep holding A button and push B button 3 times, LED will start flashing continuously. Press any key on the remote control. LED lights remain off to indicate code deletion success; if the LED lights when pressing the button, the original code was not deleted. Step 2: Clone your original remote. 1) Put both remotes back-to-back position. Ensure they have direct contact. 2) Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until LED makes 2 blinks, then 3 blinks, then goes into steady state. Successful cloning confirmed. Left keys follow the same operation. Package Contents: 1 x Remote Control Duplicator